Here is the mast ram. It comes as a complete circle, but with the dremel I cut half of the circle off to make it work better against the mast. You will be able to see this better when a rig is on the boat.
Saturday, February 7, 2009
Subscribe to:
Post Comments (Atom)
Blog Archive
-
▼
2009
(123)
-
▼
February
(42)
- Hull painted
- Color on the hull
- Covering up the white bottom and blue boot stripe
- White paint on the hull
- Blue Boot Stripe - II
- Blue Boot Stripe
- Hull faired, primed and ready for final paint!
- Hull pictures
- Thursday - February 12th update
- Fixed the Hull/Deck Joint
- Set Back
- RUDDER
- Back in the barn for the night
- Primed Hull
- Getting ready to prime the hull!
- Mast ram
- Booms
- Rudder
- Rudder servo
- Main sheet post
- Mast tube - cut off and sanded down
- Rudder
- Installing mast tube, sheet post
- Deck attached to the Hull
- UPDATE - February 4, 2009
- Rudder post plug
- Underside of deck
- Shroud, Backstay and Turning Block Attachment Points
- Shaping the Transom
- Inside of the hull
- Attaching structures to the hull
- Transom
- Base for Mast Tube and Sheet Post
- Rudder Servo Bracket
- Sail Servo Bracket
- Keel box stiffeners/frames
- Cutting keel box
- Keel box / Hull joint
- Removal of Keel from Keelbox/Hull
- Forward Frame
- Sail Servo Bracket
- Foredeck Stiffener
-
▼
February
(42)
No comments:
Post a Comment