Sail Servo Bracket

I cut up some strips of fiberglass and laid them over a piece of 2 X 4 that had the edges rounded over by a router (Thanks Al!) to make up the bracket for the sail servo. This bracket will go athwartships forward of the mast and a hole will be cut in it to hold the servo. A total of 5 layers of glass were laid up, 3 of these layers were the full width and 2 small pieces were sandwiched in between the full length pieces in way of were the servo will be screwed into the bracket. I will take more pictures tomorrow so you can better see how this bracket will function.